Question:

Are bolts, mounting screws, washers and nuts supplied with CEP7-EEHF, CEP7-EEJF, CEP7-EEJG, CEP7-EEKG and CEP7-EELG overload relays? What are these hardware components used for?

Answer:

There are 6 bolts, 6 washers and 6 nuts supplied with these overload relays. The CA6 contactors also ship with the same hardware. These components will supply the user with the necessary mounting hardware to install the line and load side lugs when the overload is installed without direct mounting to a contactor. Lugs will need to be ordered separately; no lugs are supplied with the overload relay.

The CEP7-EEHF, CEP7-EEJF, CEP7-EEJG, CEP7-EEKG and CEP7-EELG overload relays will direct mount to CA6 contactors. If you buy a CA6 contactor and a CEP7 overload relay, you will end up with 12 sets of bolts, washers and nuts.

For additional information please contact your nearest authorized distributor, sales representative, or call our customer service or technical support lines.